 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LCA110L Single Pole OptoMOS(R) Relay Load Voltage Load Current Max RON LCA110L 350 120 35 Units V mA Features * Small 6 Pin Surface Mount and DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Flammability classification rating of V-0 * Current Limiting, Surface Mount and Tape & Reel Versions Available Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Description The LCA110L is a 1-Form-A solid state relay which uses optically coupled MOSFET technology to provide 3750V of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically-coupled input is controlled by a highly efficent GaAIAs infrared LED. The LCA110L can be used to replace mechanical relays and offers the superior reliability associated with semiconductor devices. Because they have no moving parts, they can offer faster, bounce-free switching in a more compact surface mount or through hole package. Regulatory Information * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified to: EN 60950, EN 41003, AS/NZS 3260, IEC 950 Ordering Information Part # LCA110L LCA110LS LCA110LSTR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration LCA110L Pinout AC/DC Configuration 1 2 3 6 5 4 LCA110L Pinout DC Only Configuration 1 2 3 6 5 4 + Control - Control NC Load Do Not Use Load + Control - Control NC + Load - Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON 10%+ TOFF DS-LCA110L-R1.0 www.clare.com 1 LCA110L Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW VRMS +85 C +125 C +260 +220 C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Load Current Limiting Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance Conditions IL=120mA IL=200mA VL=350V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz Symbol VL IL IL RON RON ILEAK TON TOFF COUT ICL IF IF VF VR IR CI/O Min 130 2 0.4 0.9 Typ 19 7 25 170 0.7 1.2 3 Max 350 120 200 35 10 1 3 3 210 50 1.4 5 10 Units V mA mA A ms ms pF mA mA mA V V A pF IL=120mA IF=5mA VR=5V - 2 www.clare.com Rev. 1.0 LCA110L PERFORMANCE DATA* 35 30 Device Count (N) LCA110L Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC 35 30 Device Count (N) LCA110L Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 120mADC; IF=2mADC) Device Count (N) LCA110L Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 35 30 25 20 15 10 5 0 376.3 382.8 389.3 395.8 402.3 408.8 415.3 Blocking Voltage (V) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 25 20 15 10 5 0 17.0 17.4 17.8 18.2 18.6 19.0 19.4 On-Resistance () LCA110L Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 120mADC) 25 20 15 10 5 0 0.45 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) 25 20 15 10 5 0 LCA110L Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 120mADC) 25 20 15 10 5 0 0.45 0.75 1.05 1.35 1.65 1.95 2.25 LCA110L Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 120mADC; IF = 2mADC) Device Count (N) Device Count (N) Device Count (N) 0.15 0.25 0.35 0.45 0.55 0.65 0.75 LED Current (mA) Turn-On (ms) LCA110L Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 120mADC; IF = 2mADC) 25 Load Current (mA) 180 160 140 LCA110L Typical Load Current vs. Temperature 0.016 0.014 Leakage (A) 0.012 0.010 0.008 0.006 0.004 0.002 -40 -20 0 20 40 60 80 100 120 0 -40 LCA110L Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Device Count (N) 20 15 10 5 0 0.025 0.075 0.125 0.175 0.225 120 100 80 60 40 20 0 Temperature (C) 10mA 5mA 2mA -20 0 20 40 60 80 100 Temperature (C) LCA110L Typical Blocking Voltage vs. Temperature 420 Blocking Voltage (VRMS) 410 Turn-On (ms) 400 390 380 370 360 -40 -20 0 20 40 60 80 100 2.000 1.800 1.600 1.400 1.200 1.000 0.800 0.600 0.400 0.200 0 -40 LCA110L Typical Turn-On vs. Temperature (Load Current = 120mADC) 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0 -40 LCA110L Typical Turn-Off vs. Temperature (Load Current = 120mADC) Turn-Off (ms) 2mA 5mA 10mA 20mA -20 0 20 40 60 80 100 2mA 5mA -20 0 20 40 60 80 100 Temperature (C) Temperature (C) Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 1.0 www.clare.com 3 LCA110L PERFORMANCE DATA* LCA110L Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (C) LCA110L Typical Turn-On vs. LED Forward Current (Load Current = 120mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) LCA110L Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) 0.35 0.30 Turn-Off (ms) 0.25 0.20 0.15 0.10 0.05 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 30mA 20mA 10mA 5mA LCA110L Typical On-Resistance vs. Temperature (Load Current = 120mADC; IF=2mADC) 60 LED Current (mA) On-Resistance () 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 Temperature (C) 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 LCA110L Typical IF for Switch Operation vs. Temperature (Load Current = 120mADC) 3.000 2.500 LED Current (mA) 2.000 1.500 1.000 0.500 -20 0 20 40 60 80 100 0 -40 LCA110L Typical IF for Switch Dropout vs. Temperature (Load Current = 120mADC) -20 0 20 40 60 80 100 Temperature (C) Temperature (C) 150 Load Current (mA) 100 LCA110L Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 2mADC LCA110L Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time 350.0 300.0 Current (mA) 250.0 200.0 150.0 100.0 50.0 0.0 1s 10s 100s -40 LCA110L Typical Current Limiting vs. Temperature IF=2mADC 50 0 -50 -100 -150 -3 -2 -1 0 1 2 3 Load Voltage (V) Load Current (A) -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 1.0 4 www.clare.com LCA110L MECHANICAL DIMENSIONS 6Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 6-.800 DIA. (6-.031 DIA.) 6.350 .127 (.250 .005) 2.540 .127 (.100 .005) 7.620 .127 (.300 .005) 5.080 .127 (.200 .005) 6Pin DIP Surface Mount ("S" Suffix) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) 1.499 .127 (.059 .005) Dimensions mm (inches) Rev. 1.0 www.clare.com 5 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LCA110L-R1.0 (c)Copyright 2001, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 10/25/01 |
Price & Availability of LCA110L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |